TPS200-UPA12
200 W, 12 V, Uninterruptible power supply
The UPS DIN RAIL series keeps up the power supply for a few minutes after the power-grid falls out. This allows you to backup data or to do a controlled shut down. Security systems can continue the service for some time. The standby time depends on your chosen battery capacity.
A display shows the current capacity of the battery. In battery mode, the output voltage will slowly adjust itself . If a constant voltage is required, we also provide different output voltages and capacities. Batteries, lithium batteries or capacitors can be installed. The prerequisite is to ensure the correct charging / discharging voltage according to the battery charge state of the battery safety and monitoring.
Features:
- Battery type: lead acid gel or AGM
- Input: 85 - 264 VAC
- Output: 9.6 - 13.6 VDC, 16.5 A, 200 W max.
- Discharger time: depending on battery capacity
- 100 % full load burn-in test
Applications:
- Electrical cabinets
- Industrial machines
- Machine control
- Alarm security systems
- Video surveillance
- Fire alarm systems
- ATM´s
Safety features:
- Discharger Protectionn
- Discharger warning < 200 W
- with continuous power limitation (no simple Hiccup solution)
- LED Indication:
Off = AC off and battery off
green = AC on
orange = AC on and charging battery
red = AC off and power output of battery
- Temperature protection
- Short circuit protection
- Protection Class I
Safty features:
- CE compliance with Low-Voltage Directive 2014/35/EU
- EMC Directive compliance with 2014/30/EU
- Safety compliance with UL508, UL60950-1, EN60950-1
Dimensions:
- TPS100/TPS150/TPS200
230 x 127 x 116 mm (L x B x H)
Matching Products as DIN RAIL battery chassis could be found at the end of this page. Please see “related or matching products”
